Alabama Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana | Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota | Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming |
dealer near sumner, washington
We sell online only as a dealer for the Defy products.
I live in Hamilton ontario – how long will it take to ship 5 gallon pail and what are shipping charges
2-4 days and please add to cart, enter a shipping address, for the total costs.
How soon can I apply Masonry Saver to new concrete?. I just poured a new garage floor. Thank you.
After 2-4 weeks.
places to buy in portland Oregon or Vancouver Washington
We sell online only as a dealer for the Defy products.
Are there any stores in the Oklahoma City area that sell your products?
We sell online only as a dealer for the Defy products.
My Boat dock had Cabot oil base stain put on it about three years ago can I put defy water-based stain over top of the original oil base stain?
No, you cannot apply Defy over a different brand of stain.
Don’t u really mean they can’t put water base over their oil base? Pls clarify
You cannot apply the Defy Extreme Semi-Transparent Stain over any other brand of stain without removing the old stain first. Does not matter if oil or water-based.
I built a small stoop, approximately 8 feet by 4 feet, to cover my deteriorating front concrete steps. I used treated lumber for framing and cedar for floor and railing. I’m in Minnesota and this project was started in June 2021. My question is, can I use Defy semi transparent water base on both sides of flooring boards? The reason for treating both sides is my concern of mildew because the framing is sitting on top of the concrete.
You can use on both sides.
Is there a dealer in ohio or west virginia
We sell online only as a Defy dealer.
where can I buy DEFY stains in Canada?
No dealers in Canada. You can order and have it shipped to you via our website.
What is meant by 2 coats, “wet on wet?”
https://www.defystainhelp.com/what-is-wet-on-wet-stain-application/
About 1 month again I installed concrete paver stones (16 X 24) over an existing old concrete patio that was 24 feet wide. I alternated the pattern to prevent exaggerating lines in joints. I used Easy Joint instead of polymeric sand.
Because of the alternating pattern, I had to cut a few pavers in half using a rented paving saw that used water. I did not rinse off the stones thoroughly after they were cut. I assumed that would be easy enough using a hose with a power nozzle. Wrong! Now I am going to seal the patio using your Masonary Saver Paver sealer. I want a wet look and limited gloss.
My question is, “What should I do about the white-spotted pavers before sealing it? Like I said, all I have really done is blast it with a hose nozzle and have not really scrubbed it or applied anything to it.
Also, how long should the patio dry out from rain and/or additional washing before the sealer is sprayed on?
Thank You
Terry Sellers
Send some pictures as we are not sure what the white posts are of if they can be removed. 48 hours after prep or rain to seal.
Here are 3 Pictures that have appropriate filenames.
We used Defy deck stain on our new deck which we love. However, we got stain on the white azec trim. How do we safely clean the stain without hrting the azec/trex?
Try a water based graffiti remover cleaner from your local paint store. Test spot first.
What would be the price to ship one gallon to Canada?
Please add to cart and enter shipping info for the total cost.
Trying to order 5 gallons of Defy Extreme from BC Canada. Is the final cost of $344.62 in US or Canadian dollars?
USD
Will defy stain stripper remove a newly sealed deck with toner weather sealer?
Depends on the brand? Send pictures as well.
Is there a dealer in Montrose or Grand Junction that sells it?
We are an online dealer for Defy.
Hello
In my previous question you said I could use your extreme composite deck sealer on a new outdoor Composite table. But when I looked up the directions it says not designed for use on new composite lumber.
So I am confused can you use this product on a new table or not?
please help
thanks
Yes, as long as the surface is composite and it is porous.
I have a 240 sq. ft. cedar deck. Do I need to apply 2 coats of wood stain? Also, how much wood stain, stripper, and brightener do I need to order?
2 coats wet on wet. About 3 gallons of stain. As for Stripper, we would need to see pictures of the current conditions and what stain is on the wood now?
If I can use your sealer on table how do I apply it?
You can use this: https://www.defystain.com/defy-composite-deck-sealer-detail.html
Apply with a brush.
I just bought a composite outdoor table that is showing water stains. Can I use your Sealer product On the table? Thanks
can masonry saver be applied with a roller as opposed to sprayer?
It does need to be sprayed on.
Ok to back roll after spray on?
No, do not backroll. You will not need to anyhow.
Thanks for your prompt response ses
I made an order this week, who can I contact on when this will be shipped?
Reply from your order email.
I ordered a sample of drift wood stain. I did not order any cleaner or conditioner (did not see sample option). How should I prep wood for sample application?
Just make sure the wood is clean and dry of any previous coatings, dirt, etc.
How do I get free shipping on 8 gallons of MasonrySaver paver seller?
5-Gallon pails ship free but singles gallons do not as the singles must ship in a separate box.
What stain do I use on tiger wood
https://www.defystain.com/defy-hardwood-stain.html
We used your Defy Epoxy Fortified Deck Stain several years ago and would like to use it again but we can’t seem to locate any. Can you help?
It was replaced with Defy Extreme. Same colors: https://www.defystain.com/wood-restoration/wood-and-deck-stains/defy-extreme.html
I live in Virginia and have a 20 year old 600 SF pressure treated deck which is was last treated 10 years ago with a product called Ready Seal. Overall the wood is structurally solid. What product do you recommend that I use to prep and seal the deck and how much should I purchase?
You will need to prep with the Defy Wood Cleaner and the Defy Brightener. One container of each. About 6 gallons of the Defy Extreme for the two coats.
I used Defy Extreme Stain ( Driftwood Gray) on a boat dock 5 years ago and on a new deck 3 years ago. Both the dock and the deck need reapplication now. How do I prep both surfaces? The boat dock is weathered and porous. The deck is less porous in most places.
Use the Defy Wood Cleaner and pressure washing for prep.
Why am i being charged shipping ($16.83) with 5 gallons (5 one-gallons) of ‘Defy Extreme 1 Gallon’ stain? Also purchasing the 2-gallon sprayer, crack n’ groove tool and 4″ brush.
No free shipping on the Sprayer, brush, etc. It explains this at checkout.
I need to remove the solid stain on a deck that butts again my house that is sided in this steel siding.
Will any of the recommended products (cleaner, stripper, brightener) harm the finish? There is NO space between the deck and the siding, so I am unsure of how to accomplish the work without getting the products on the siding.
It is not possible to strip a solid stain so you will have to power sand if you want to remove it.
I do plan to sand. The question remains about using the other products like cleaner and brightener. I don’t think it will be possible to cover the siding. Will the products harm steel siding and if so, how do we keep this from happening when using products like the cleaner and brightener?
It should not harm the siding but no way to say for certain without doing a test spot.
Could you please tell me the cost of 5 gallons?
Which product? You can see the cost by clicking on the product links in the menu.
I need a solid/opaque stain for my deck which is about 20 years old. All I see is Semi-Trans in your Wood Restoration. What should i use?
I am sorry but we do not sell a solid stain from the website as they have to be custom mixed.
Bummer, ok, thank you!
What sealant would you recommend for brick pavers that were laid on top concrete
The Masonry Saver Brick Paver Sealer: https://www.defystain.com/concrete-products/brick-paver-sealers.html
I put on a new pressure treated boat dock deck in February of 2019.
Can I apply the first sealer now with Defy Extreme ???
It is 500 sq ft
Will one – 5 gallon pail be enough??
Yes, you can stain now but make sure to use the Defy Wood Cleaner and the Defy Wood Brightener as the prep. 5-gallons will be very close to being enough.
Is this product good for cedar fencing? It has never been stained is about 12 months old.
Yes, it works great for cedar fencing!
I stripped and sanded with 60 grit paper my 7 year old deck. I live in upstate NY. Can I wait until spring to stain?
Yes, use the Defy Wood Cleaner and then the Defy Brightener for prep after.
Hello,
I have a new redwood decking boards which I plan to sand, brighten, then stain. But the posts are 6×6 rough cut fir which have an old coat of stain. How do you recommend removing the old stain on vertical rough cut wood? My concerns are stripper won’t penetrate on a vertical surface and the rough surface is not conducive to sanding. Thanks.
Post a picture.
If I use the stripper and brightener, do I need the cleaner as well? Or is it clean-strip-brighten.
No need for a cleaner if using the stripper.
We have a new deck. The wood is p.t. and is double kiln dried. We like the reviews associated with your stain. We were hoping for a light grey color but you don’t seem to have one. Any solutions for us here in Forest City, N.C.. Lastly, given our wood is double kiln dried, how long should we wait to begin the total procedure.
The Defy Extreme comes in a Driftwood Gray. Wait a couple of months and use the Defy Wood Cleaner and the Defy Wood Brightener for the prep.
Two questions: 1) I used DEFY Extreme Semi-transparent (light walnut) on our deck 3 years ago. Now it’s time to re-stain. How much of the old DEFY stain needs to be removed before I apply the stain? Can there be some left, or does it all need to be power-washed off down the the bare cedar? 2) Last time I bought the stain, I found a local retailer (paint store) and bought it there. Can I only buy your stain via this website now? Thanks!
1. Some can be left.
2. We are an online dealer only for Defy.
My 14×16 pressure treated deck has been sanded down to bare wood. Boards are in good condition. Can you please advise what stain should be used, oil or water based. Also, I do not want to use a wet on wet product.
I live in Ontario, Canada and my deck faces north.
If I need 2 gallons how much would the total cost be including shipping??
Hello, Defy is a wet on wet application and only comes in water-based. In addition, you will need to remove all of the stain from the floor prior to using the Defy. You still have some old stain in spots around the edges, etc.
For shipping charges, please add to cart and enter your shipping info to see the total cost.
Do you have any distributors that carry your product or is direct shipping your only method?
I was wondering if any national chains carried your product?
Defy is not carried at Nation chains. We are an online dealer that ships directly to your home.
Can you ship the Defy Extreme Semi-Transparent to Canada?
Yes, we can ship to Canada: https://www.defystain.com/wood-restoration/wood-and-deck-stains/defy-extreme.html
The deck had never been cleaned as was covered with lichen and dirt. I power washed it 3 weeks ago and it looks great. The deck has no rails and gets a lot of shade. I plan to use Defy Extreme. Should I prep using the cleaner and brightener?
Pictures, please.
DO You Ship Your Products To Alaska
We do not.
How much wood cleaner do I need for a 1000 sq. ft deck?
2 of the 2.25# containers.
I have a redwood deck about 1000 sq. Feet. It’s 4 years old and in need of a restrain. When the contractor built the deck he only stained the top. Needless to say, there is warping and peeling. I plan to rent a large sander and sand the whole deck. Is there any advice you can offer so I can get a nice looking deck? I live in Flagstaff Az. at an elevation of 7250 feet.
thanks
Walt
Hello,
It is normal to only stain the top exposed wood. When sanding, do ot use a grit finer than 80. After the sanding do a light cleaning with the Defy Wood Cleaner to help open the grain for the stain.
How long does shipping take?
Hi, shipping depends on where you live? Could be 2-4 business days on average.
My deck is 6 years old. It has never been stained but I have put Thompson’s water seal on it a couple of times in the past. The last time that I sealed it was about 3 years ago and it appears to have all worn off. Is there anything else that I would need to do other than cleaning it good before applying the wood stain? Also, is there any need to put a sealer on it after applying your stain or does your product stain and seal?
Prep with the Defy Wood Cleaner and then the Defy Wood Brightener. You cannot nor is there a need to apply a sealer on top of the stain.
Near Hurricane WV 25526
Hello, We ship directly from our site to your home.